Industrias Montilla
Toll Free
01 800 5902 242

52 (614) 418 - 1911
52 (614) 418 - 1900
Industrial Shelving Systems
SELECTIVE PALLET RACK
STRUCTURAL PALLET RACK
DYNAMIC PALLET RACK
DRIVE IN RACK
LIFO STORAGE SYSTEM
DRIVE THRU RACK
FIFO STORAGE SYSTEM
PALLET RACK ACCESSORIES
WIRE SHELF &
SHELVES FOR RACKS
PALLET RACK COMPONENTS
MEDIUM
LOADS
SHELVING
CARTON FLOW RACK
MOBILE
SHELVING
LOCKERS, LOCKER SHELF & CABINETS
GONDOLA SHELVING

Calzada Silvestre Terrazas
No. 10801Col. Hidalgo,
C.P. 31414
Chihuahua, Chih.
México
Metal Shelving Manufacturer
Racks Mexico

Selective Rack

Most popular type of storage rack.
Pallets are supported between load-supporting beams.
Special attachments and decking can be used to make the racks capable of supporting other types of unit loads besides pallets (e.g., coils, drums, skids)
Selective racks can be used for the following types of storage:
Standard single-deep storage using a counterbalanced lift truck
Narrow-Aisle storage using a narrow-aisle lift truck
Deep-Reach greater than single-deep storage (typically double-deep storage)

Drive-Through Rack


Loads are supported by rails attached to the upright beams
Lift trucks are driven between the uprights beams
Requires similar-width loads
Open at both ends, allowing access from both ends (FIFO)
   

Design, manufacture, commercialization and installation of storage systems industrial shelving, material handling and shop shelving for commerce, mini supers, clubs, pharmacies, ironmongeries, restaurants, hotels, offices, as well as industries, assembly plants, fabrics, etc.

 



Rack Drive In


Same as drive-through rack, except closed at one end, allowing entry from only one end (LIFO)

Flow-through Rack


Loads are supported on an incline to enable gravity-based movement of the loads within the rack (via, e.g., a gravity roller conveyor)
Loaded at the higher end and unloaded at the lower end (FIFO)

Push Back Rack

Same as push-back rack, except loaded and unloaded at the lower end and closed at the higher end (LIFO)
Cantilever Rack


Loads are supported by cantilever "arms"
Used to store long loads (e.g., bar stock, pipes, lumber)
Similar to pallet racks, except the front upright beams and the front supporting beams are eliminated

Shelves/Bins/Drawers
 
METAL SHELVING CONTACT SPANISH
Copyright 2010-2011 Industrias Montilla México ®.
All rights reserved.
Industrias Montilla Site Map